Tabs

Monday, August 1, 2011

Monogrammed Baby Snuggle Squares

**In case you missed it, I posted over at Nature's Heirloom on July 21st.
Here's the project I shared!**
___________________

When my daughter was a few months old, a family member sent her 2 silky lovies as a gift. We gave them to her at naps and bedtime, and 2 years later she won't go to sleep without at least one of her favorite blankies. When my son was born, I knew I wanted him to have a couple of his own too.

These snuggle squares are made of flannel on one side and soft satin material on the other, so they're the perfect little lovies for cuddling and comforting little ones. Best of all, they're super easy to make.



Supplies for 1 Snuggle Square:
  • 1/2 yard flannel
  • 1/2 yard coordinating satin fabric
  • Sewable interfacing
  • Scissors
  • Disappearing ink marker
  • Printer and paper
  • Sewing machine and coordinating thread
  • Rotary cutter and mat

Step 1: Cut out your fabrics.


1. Wash your fabrics before use to make sure they don't shrink later.
2. Cut out a 19"x19" square from both your flannel and your satin material using your rotary cutter and mat.

Step 2: Make your monogram.


1. From your leftover flannel, cut out a piece of fabric 1 inch larger than you want your letter to be. Iron a slightly smaller piece of sewable interfacing to the back (the wrong side) of the fabric according to the interfacing directions. Remove paper backing.

2. In Microsoft Word, type up and print out your monogram letter, then carefully cut out with scissors. My letter was roughly 3"x3". Place it on the back of your fabric, making sure the letter is facing backwards when you trace.

3. Trace around your letter using a disappearing ink marker.

4. Cut out your letter.

Step 3: Attach your monogram.



1. With your iron on a low setting, iron your monogram onto a corner of your satin fabric on the top (or right side) of the fabric. If you're having a hard time ironing your monogram on, try placing a cloth on top of the fabric and ironing on a higher heat setting.

2. Set your sewing machine to a zig-zag stitch. Stitch around the entire perimeter of your letter, making sure to backstitch some at the beginning and end to secure.

3. This is how your finished monogram should look.


Step 4: Join your two fabrics.



1. With the right sides together, place your satin fabric on top of your flannel and match up the edges.

2. Pin and stitch around the perimeter of your fabric about 1/4 inch from the edge, leaving a space about 4 inches long unsewn for turning. (Make sure you use lots of pins when you pin the fabric because the satin is slippery and you don't want it to slide around as you sew.)

3. Clip your corners close to the stitching (but not too close!) Turn your blanket inside out and press with a hot iron on the flannel side. Make sure you press the edges of your opening inside so it matches up with the rest of your blanket.

4. Top stitch around the perimeter of your blanket 1/4 inch from the edge.

Done!



Let the snuggling begin!




I hope your little ones enjoy their snuggle squares as much as mine do.

Linking up to THESE great parties!

2 comments:

  1. I LOVE this - off to find some satin fabric tomorrow i think!! :) Thanks for the great tutorial x

    ReplyDelete

Thanks for all of your wonderful comments! I try to respond to each of them through email so please make sure you leave an email address or have your profile set up to include your email address if you want me to respond :)